SANYO DENKI（山洋電気） PRODUCTS

SANMOTION SANMOTION R - AC Servo Set
SR405CR01M

  • Eco Products
  • CE
  • UL
  • UKCA

For illustrative purposes only

Set item model no.

Set item 1
AC Servo Motor(R2AA04005FCRA0M)
Set item 2
AC Servo Amplifier(RS3A01A0AA0)
Set item 3
Host controller connector (CN1)
Set item 4
Connector for power supply or regenerative resistor connection (CNA)

Specifications

Model No.
SR405CR01M
Motor classification
Rotary (Medium inertia)
Motor flange size[mm]
□40
Rated output[kW]
0.05
Rated speed [min-1]
3000
Max. speed [min-1]
6000
Rated torque [N·m]
0.159
Continuous stall torque [N·m]
0.167
Peak stall torque [N·m]
0.59
Rotor inertia [×10-4kg·m2 (GD2/4)]
0.0376
Encoder inertia [×10-4kg·m2 (GD2/4)]
0.0042
Encoder type
Battery-less absolute
Encoder Resolution [P/R]
17-bit
Output shaft
Straight
Connection
With connector for cable connection
Oil seal
No
Protection rating
IP67
Servo motor mass [kg]
0.68
Brake Type
Holding brake
Safety functions
No
Built-in regenerative resistor
No
Operating temperature range
0～40℃
Operating humidity range
90% max. (non-condensing)
Interface
Analog/Pulse

Download Materials List

Materials Material No. File Size Download Link
Catalog Download
SANMOTION MOTOR Setup Software Download
SANMOTION R / SANMOTION Q motor sizing software Download

Related Information

Software
Manual
Catalog Site
RoHS Directive compliance of your products
Safety Precautions
Precautions For Adoption(AC Servo Systems)
Precautions For Adoption(Stepping Systems)
Compliance with the EU RoHS2 Directive
Contacts
  •  
License Agreement

This license agreement is a legal agreement between the customer and SANYO DENKI CO., LTD. and its subsidiaries (hereinafter referred to as "SANYO DENKI Group") regarding SANYO DENKI CO., LTD. software (hereinafter referred to as "the software").

The customer may download this software only upon consenting to this agreement.

1. License Grants

SANYO DENKI Group grants the customer the nonexclusive right to use this software. The customers may use, install, and update the software while using the product purchased from the SANYO DENKI Group.

The customer may not lend or transfer this software to a third party nor offer it as collateral without obtaining prior written approval from SANYO DENKI Group. In addition, if the customer lends or transfers the software to a third party with prior written approval of SANYO DENKI Group, the customer must ensure that the third party complies with the provisions of this agreement.

2. Copyrights and Intellectual Property Rights

SANYO DENKI retains all copyrights, patent rights, trademark rights, know-how, and all other intellectual property rights related to this software and relevant printed materials (including electronic media).

3. Warranty Coverage

SANYO DENKI Group guarantees the operation and functions described in the instruction manual for this software. However, the warranty does not cover the software in the following cases:

  1. (1) The software is used in unsupported operating environments or with unsupported products.
  2. (2) The software is used in a manner other than as specified in the instruction manual.
  3. (3) The software is modified.
4. Legal Disclaimer

SANYO DENKI Group and its distributors are not liable for any damages outside the scope of warranty as stated in this license agreement.

SANYO DENKI Group is not responsible for any malfunction caused by installing or updating this software in unsupported operating environments or with unsupported products.

5. Jurisdiction

Any disputes arising in the fulfillment of this agreement shall be settled by the Tokyo District Court as the exclusive competent court.

6. Governing Law

This agreement shall be governed by the laws of Japan.

  • No match product found.

  • No match product found.

  • Processing was interrupted because the number of displayed items was exceeded. Add the filter condition and re-execute

  • Loading... Please Wait