This PV inverter can cut the peak power in combination with a lithium-ion rechargeable battery. The combined use of the PV systems and storage batteries provides the optimal control of power for demand.Lineup
Isolated Operation Function Supplies Power During Outages
Power equipment can use electricity even during an outage because the PV inverter will supply power stored in the battery and generated by the PV system.
Peak Cut Function (Grid-Connected Isolated Charging Operation Type)
At nighttime, power can be stored in lithium-ion batteries and drawn upon during the day to cut daytime power consumption.
Meets FRT Requirements / Power Factor Correction
Meets the FRT requirements(1) for operation in a 3-phase grid.
Output power factor can be set between 0.8 and 1.0 in 0.01 increments.
Correcting the power factor allows operators to regulate increases in grid voltage.
(1) FRT: Fault Ride Through
System Configuration from 10 to 60 kW
The system is composed of stacked 10 kW units, allowing for compact systems of up to 60 kW.
This license agreement is a legal agreement between the customer and SANYO DENKI CO., LTD. and its subsidiaries (hereinafter referred to as "SANYO DENKI Group") regarding SANYO DENKI CO., LTD. software (hereinafter referred to as "the software").
The customer may download this software only upon consenting to this agreement.
- 1. License Grants
SANYO DENKI Group grants the customer the nonexclusive right to use this software. The customers may use, install, and update the software while using the product purchased from the SANYO DENKI Group.
The customer may not lend or transfer this software to a third party nor offer it as collateral without obtaining prior written approval from SANYO DENKI Group. In addition, if the customer lends or transfers the software to a third party with prior written approval of SANYO DENKI Group, the customer must ensure that the third party complies with the provisions of this agreement.
- 2. Copyrights and Intellectual Property Rights
SANYO DENKI retains all copyrights, patent rights, trademark rights, know-how, and all other intellectual property rights related to this software and relevant printed materials (including electronic media).
- 3. Warranty Coverage
SANYO DENKI Group guarantees the operation and functions described in the instruction manual for this software. However, the warranty does not cover the software in the following cases:
- (1) The software is used in unsupported operating environments or with unsupported products.
- (2) The software is used in a manner other than as specified in the instruction manual.
- (3) The software is modified.
- 4. Legal Disclaimer
SANYO DENKI Group and its distributors are not liable for any damages outside the scope of warranty as stated in this license agreement.
SANYO DENKI Group is not responsible for any malfunction caused by installing or updating this software in unsupported operating environments or with unsupported products.
- 5. Jurisdiction
Any disputes arising in the fulfillment of this agreement shall be settled by the Tokyo District Court as the exclusive competent court.
- 6. Governing Law
This agreement shall be governed by the laws of Japan.