PV Inverter SANUPS P73L
- Grid-connected operation
- Isolated operation
- With peak cut function
- JET certified
- Meets FRT requirements
- With Output Control function
- With storage battery
For illustrative purposes only
- Model No.
- Rated input voltage[V]
- Max. allowable input voltage[V]
- Input operating voltage range[V]
- DC150 ～ 570
- Rated output capacity[kW]
- Rated output capacity - During isolated operation[kW]
- MPPT input voltage range[V]
- No. of output phases/wires
- 3-phase 3-wire
- Rated output voltage[V]
- Output voltage regulation
- Isolated operation: Within ±8% of rated voltage
- Rated output frequency[Hz]
- Output frequency regulation
- Within ±0.1 Hz of rated frequency
- Output current harmonic distortion
- Isolated operation: 5% or less at linear load
- Output overload capability
- 100% continuous
- Output power factor
- 0.95 or greater. Power factor setting range: 0.8 to 1.0 (in increments of 0.01))
- Main circuit type
- Self-commutated voltage type
- Switching method
- High-frequency PWM
- Isolation method
- High-frequency isolation
- Cooling method
- Forced air cooling
- Grid protection
- Overvoltage (OVR), undervoltage (UVR), overfrequency (OFR), underfrequency (UFR)
- Islanding detection - Passive method
- Voltage phase jump detection
- Islanding detection - Active method
- Reactive power variation method
- Operating temperature
- — 10 ～＋ 40℃
- Operating humidity
- 30 to 90% (non-condensing)
- Operating altitude (maximum)
- 1000 m
Download Materials ListLogin is required to download
|Materials||Material No.||File Size||Download Link|
|Isolated output transformer 1.5 kVA (TRP73H152SA01)|
|Isolated output Scott-T transformer 10 kVA|
|Weather signal conversion box|
This license agreement is a legal agreement between the customer and SANYO DENKI CO., LTD. and its subsidiaries (hereinafter referred to as "SANYO DENKI Group") regarding SANYO DENKI CO., LTD. software (hereinafter referred to as "the software").
The customer may download this software only upon consenting to this agreement.
- 1. License Grants
SANYO DENKI Group grants the customer the nonexclusive right to use this software. The customers may use, install, and update the software while using the product purchased from the SANYO DENKI Group.
The customer may not lend or transfer this software to a third party nor offer it as collateral without obtaining prior written approval from SANYO DENKI Group. In addition, if the customer lends or transfers the software to a third party with prior written approval of SANYO DENKI Group, the customer must ensure that the third party complies with the provisions of this agreement.
- 2. Copyrights and Intellectual Property Rights
SANYO DENKI retains all copyrights, patent rights, trademark rights, know-how, and all other intellectual property rights related to this software and relevant printed materials (including electronic media).
- 3. Warranty Coverage
SANYO DENKI Group guarantees the operation and functions described in the instruction manual for this software. However, the warranty does not cover the software in the following cases:
- (1) The software is used in unsupported operating environments or with unsupported products.
- (2) The software is used in a manner other than as specified in the instruction manual.
- (3) The software is modified.
- 4. Legal Disclaimer
SANYO DENKI Group and its distributors are not liable for any damages outside the scope of warranty as stated in this license agreement.
SANYO DENKI Group is not responsible for any malfunction caused by installing or updating this software in unsupported operating environments or with unsupported products.
- 5. Jurisdiction
Any disputes arising in the fulfillment of this agreement shall be settled by the Tokyo District Court as the exclusive competent court.
- 6. Governing Law
This agreement shall be governed by the laws of Japan.