SANYO DENKI(山洋電気) PRODUCTS

SANUPS Online UPS SANUPS RMA
RMA500T3

  • Parallel redundancy
  • Vertical type
  • Input terminal block
  • Output terminal block

For illustrative purposes only

Specifications

Model No.
RMA500T3
UPS topology
Double conversion online
No. of input phases/wires
3-phase 3-wire
Rated input voltage[V]
200
Input voltage range
±15% of rated voltage
Rated input frequency[Hz]
50/60
Input frequency range
Within ±5% of rated frequency
Input power factor
0.97 or greater (lagging)
No. of output phases/wires
3-phase 3-wire
Rated output capacity[kVA]
50
Rated output capacity[kW]
45
Rated output voltage[V]
200
Output voltage regulation
Within ±2% of rated voltage
Rated output frequency[Hz]
50/60
Output transient voltage fluctuation
At abrupt input voltage change: ±2% of rated voltage (For loss or return of input power / for ±10% voltage changes) At abrupt load change: Within ±5% of rated voltage (For 0⇔100% load step changes) At output transfer: Within ±5% of rated voltage (At the time of transfer from bypass to inverter, at rated output)
Output overcurrent protection
Uninterrupted transfer to bypass at approx. 150% or more (With automatic retransfer function)
Output overload capability
Inverter: 125% (for 10 min), 150% (for 1 min); at rated input and rated load power factor Bypass: 200% (for 30 s), 800% (for 2 cycles); at rated input and rated load power factor
Inverter
High-frequency PWM
Energy storage device type
Small-sized valve-regulated lead-acid (VRLA) battery
Standard backup time[min]
10
Cooling method
Forced air cooling
Operating temperature range
0 ~ +40℃
Operating humidity range
30 to 90% (non-condensing)
Acoustic noise[dB]
60
Heat dissipation[W]
8800
Mass[kg]
2400
Contacts
  •  
License Agreement

This license agreement is a legal agreement between the customer and SANYO DENKI CO., LTD. and its subsidiaries (hereinafter referred to as "SANYO DENKI Group") regarding SANYO DENKI CO., LTD. software (hereinafter referred to as "the software").

The customer may download this software only upon consenting to this agreement.

1. License Grants

SANYO DENKI Group grants the customer the nonexclusive right to use this software. The customers may use, install, and update the software while using the product purchased from the SANYO DENKI Group.

The customer may not lend or transfer this software to a third party nor offer it as collateral without obtaining prior written approval from SANYO DENKI Group. In addition, if the customer lends or transfers the software to a third party with prior written approval of SANYO DENKI Group, the customer must ensure that the third party complies with the provisions of this agreement.

2. Copyrights and Intellectual Property Rights

SANYO DENKI retains all copyrights, patent rights, trademark rights, know-how, and all other intellectual property rights related to this software and relevant printed materials (including electronic media).

3. Warranty Coverage

SANYO DENKI Group guarantees the operation and functions described in the instruction manual for this software. However, the warranty does not cover the software in the following cases:

  1. (1) The software is used in unsupported operating environments or with unsupported products.
  2. (2) The software is used in a manner other than as specified in the instruction manual.
  3. (3) The software is modified.
4. Legal Disclaimer

SANYO DENKI Group and its distributors are not liable for any damages outside the scope of warranty as stated in this license agreement.

SANYO DENKI Group is not responsible for any malfunction caused by installing or updating this software in unsupported operating environments or with unsupported products.

5. Jurisdiction

Any disputes arising in the fulfillment of this agreement shall be settled by the Tokyo District Court as the exclusive competent court.

6. Governing Law

This agreement shall be governed by the laws of Japan.

  • No match product found.

  • No match product found.

  • Processing was interrupted because the number of displayed items was exceeded. Add the filter condition and re-execute

  • Loading... Please Wait